iMyFone LockWiper is one of the more capable iPhone unlocking tools we’ve tested. It handles four distinct lock types: screen passcode, Apple ID, MDM, and iCloud activation, all from a single desktop application.
We ran it on an iPhone 13 running iOS 17.4 and an older iPhone 8 to check compatibility claims. Here’s an honest look at what works, what doesn’t, and who should actually buy this.
- LockWiper removes four lock types: screen passcode, Apple ID, MDM profiles, and iCloud activation locks
- The Apple ID removal process takes about 10 minutes and requires disabling Find My first (when possible)
- Screen passcode removal installs replacement firmware and wipes the device completely
- Pricing starts at $35.95 for a 1-month license; lifetime access runs $59.95
- It won’t work on Activation Lock if the previous owner’s account is still active on the device
#What iMyFone LockWiper Does
LockWiper is a desktop application for Windows and macOS. You install it on your computer, connect an iPhone or Android device via USB cable, and run one of four unlock operations.
The four modes cover the most common lock scenarios:
Unlock Screen Passcode removes 4-digit, 6-digit, Face ID, and Touch ID locks. This is the most common use case. The process installs replacement firmware and wipes the device. You’ll lose everything unless you have a backup.
Remove Apple ID signs out the Apple ID without requiring the password. This works best when Find My iPhone is disabled. If Find My is active, you’ll need to confirm it’s disabled on the device before the process can proceed.
Bypass MDM Lock removes Mobile Device Management profiles that block access to device settings. According to iMyFone’s official documentation, LockWiper can bypass MDM without triggering re-enrollment. We confirmed this works for supervised devices that aren’t connected to an active MDM server. If you’re comparing other MDM bypass tools, LockWiper is one of the more reliable options currently available.
Remove iCloud Activation Lock is the most limited mode. It works on some older iOS versions but success rates on devices with active iCloud accounts are inconsistent. Don’t count on it if the previous owner still has the device tied to their Apple ID.
#Safety and Data Loss Considerations
The tool won’t brick your device. We tested screen passcode removal on both test iPhones and both came back up normally after the process.
Data loss is the real concern. According to Apple’s device support documentation, removing a passcode requires erasing all content and settings on the device. There’s no workaround. Any tool that claims otherwise is misleading you.
Back up before you run LockWiper. If you’re locked out completely and can’t access the device, accept that the data is likely gone.
One important limit: LockWiper can’t unlock a device protected by someone else’s active iCloud account. If you received an iPhone that was lost and erased, this tool won’t help. For that situation, you’ll need to contact Apple directly.
#How Does iMyFone LockWiper Compare to Alternatives?
LockWiper is one of three tools that dominate this category. Tenorshare 4uKey and Dr.Fone Unlock are the main competitors.
We’ve covered the full comparison of LockWiper vs. 4uKey vs. Dr.Fone in a separate article, but here’s the short version.
LockWiper handles more lock types in one application. 4uKey has a cleaner interface and slightly faster passcode removal. Dr.Fone Unlock comes with a broader feature set but costs more.
For most people locked out of their own iPhone, both LockWiper and 4uKey are comparable choices. LockWiper edges ahead specifically if you need MDM bypass capability. According to a Tom’s Guide roundup of iPhone unlock tools, LockWiper scores consistently well for MDM removal.
#Does iMyFone LockWiper Work on Android?
LockWiper has an Android version. It handles three things: screen lock removal (PIN, pattern, fingerprint), Samsung FRP bypass, and Google account removal after a factory reset.
We tested the Samsung FRP bypass on a Galaxy S22 running Android 13. It worked, but we had to enable USB debugging first, which you can only do if you still have partial access to the device. If you’re fully locked out, the FRP bypass won’t be an option through LockWiper or any similar tool that relies on USB debugging.
For Android, our best FRP bypass programs guide lists compatible options with specific Android version requirements. Our article on how to unlock Android without losing data is worth reading if data recovery matters to you.
#Step-by-Step: Removing an iPhone Screen Passcode
The setup process takes about 5 minutes before the unlock begins. Here’s what to expect:
Download and install LockWiper from iMyFone’s website. Open the app and select “Unlock Screen Passcode.”
Connect your iPhone via USB cable. Tap Trust if prompted.
LockWiper detects your device model and displays the current iOS firmware version. Click “Download” to pull that firmware package. Speed varies; expect 5-15 minutes.
Once the download finishes, click “Start to Unlock.” The full unlock and restore takes about 10 minutes.
Your iPhone restarts into setup mode. All previous data is gone.
For Apple ID removal, the steps are similar. LockWiper checks whether Find My is disabled first and will prompt you to turn it off before it can proceed.
#System Requirements and Pricing
LockWiper runs on Windows 7, 8, 10, and 11 (both 32-bit and 64-bit), and on macOS 10.10 Yosemite through macOS 14 Sonoma. For mobile devices, it covers iPhones and iPads running iOS 7 through iOS 18, plus Android phones from Android 5.0 through Android 14. Over 600 iOS and Android models are listed as supported on iMyFone’s compatibility page.
A free trial is available. It lets you run the device diagnostic and download the firmware at no cost, but the unlock itself requires a paid license. Licenses start at $35.95 for one month and go up to $59.95 for lifetime access.
Try the trial first.
#Bottom Line
LockWiper works. If you’re locked out of your own iPhone and have run out of options, it’ll get you back in. Passcode removal is reliable, MDM bypass works for non-actively-managed devices, and Apple ID removal functions when Find My is off.
The iCloud Activation Lock mode is inconsistent on recent iOS versions, and the Android FRP tool has limits when you’re fully locked out. Neither is a dealbreaker if you know what you’re getting.
Start with the free trial. If your device shows up correctly, you’re good to buy.
#Frequently Asked Questions
#Does iMyFone LockWiper delete everything on your iPhone?
Yes, all unlock operations that remove a passcode or Apple ID will erase the device completely. This is a requirement of iOS security. Apple doesn’t allow passcode removal without a full wipe. If you have an iCloud or iTunes backup, you can restore your data afterward.
#Can LockWiper bypass iCloud Activation Lock on newer iPhones?
Results are inconsistent on iPhones running iOS 16 and later. LockWiper works best for bypassing activation lock on devices running iOS 14 and earlier. For newer devices locked to an active Apple ID, contacting Apple support or providing proof of purchase is the recommended path. See Apple’s Activation Lock support page for official guidance.
#Does iMyFone LockWiper work without a computer?
No. LockWiper is a desktop application that runs on Windows or macOS. You must connect your iPhone to a computer via USB to use it. There’s no mobile version of the tool.
#Is there a free version of LockWiper?
There’s a free trial that lets you scan your device and download the firmware package, but it won’t complete the unlock without a paid license. The trial is useful for confirming your device is detected before you pay. Licenses start at $35.95 for one month.
#What’s the difference between LockWiper iOS and LockWiper Android?
They’re entirely separate tools with separate pricing. The iOS version handles passcodes, Apple IDs, MDM profiles, and iCloud activation locks. The Android version is limited to screen lock removal and Samsung FRP bypass.
Our Samsung FRP tool guide covers more Android-specific options.
#Can LockWiper remove MDM from a company-managed iPhone?
It can remove the MDM profile from the device. However, if the device is actively enrolled in a corporate MDM server, the profile may reinstall automatically on the next network connection. LockWiper’s MDM bypass works best for profiles installed by a previous employer who no longer manages the device.
#Does LockWiper require the iPhone to be in recovery mode?
Not for most operations. Screen passcode removal does require DFU or recovery mode for some older iOS versions, and LockWiper walks you through it on-screen. For Apple ID removal and MDM bypass, the device just needs to be connected via USB normally.